Standard Cylinders
Please see Features of standard cylinders for normal operationg pressure, cylinder bore, max stroke and mounting method.
Standard model
The most standard cylinder. 9 types of the mounting methods are standardized. Providinf the cushion is enabled as an option.
Photo: Standard model FA type with Limit Switch of HLS type
C Model
This cylinder is made more compact in the full length than standard core cylinder, and cylinder bore is standardized up to φ200. Normal operating pressure is corresponded to 16MPa.
Photo: C model LA type
ELH model
Similar to C model with large bore. The maximum bore of standardized model is φ330. The nominal(normal) pressure supports 16MPa.
Photo: ELH model FA type with accessories (Special MLS, Coupling and Welded type arm)
CP model
The fundamental structure is of C model. The hydraulic piping is accomplished from the head side. Either round or rectangular shape flange is available.
Photo: CP model FB type round flage type
ST model
Working oil can be sealed within the cylinder, so maintaining larger force than ordinary cylinders is accomplished.
Photo: ST model FA type
BC model
Similar to C model but is further compacted. The maximum bore of standardized model is φ80.
Photo: BC model FA type double rod type with accsessories (MS and J type arm)
MC model
Similar to BC model without flange. Retained by being mounted with the circumference of the cylinder. The minimum bore is φ20, which is the smallest among our standardized products.
Photo: MC model with reed switch built-in type
*connectors at cord end are optional
EXS model
The most compact cylinder in our standard products, and the smallest one in the world available in the market(as far as checked by us).
Photo: EXS model with Magneto-strictive sensor built-in type
MMC model
The fundamental structure is similar to MC model.The hydraulic piping is accomplished only from the head side. The cylinder has round shape.
Photo: MMC model with super sensor built-in type
DC model
The fundamental structure is similar to BC model. The hydraulic pressure is directly supplied from the flange instllation surface so plumbing is not required.
Photo: DC model FA type double rod type with accessories (MS and J type arm)
SQ model
To cool the pins connected with the cylinder, a water connecting port is provided at the back side of the mail cylinder.
Photo: SQ model with super sensor built-in type
BS model
Hydraulic pressure can be pressurized by 1.5 times its capacity.
Photo: BS model booster device
